[Click To Enlarge]
Email A Friend - Gift Reminder |
Sears Craftsman LiftMaster Chamberlain Garage Door Opener Gear Kit - Part #41A2817
Availability:
In Stock
Price:
$13.54*
|
| Part No: | B000V0KYQY |
| Manufacturer: | Chamberlain |
| MFG Part: | 41A2817 |
| Customer Rating: | 4.5 / 5.0 |
|
|
- eplacement Gear Kit assembly for 1984-current garage door opener operators
- Includes: Drive gear, plastic worm wheel, Lubriplate grease and all necessary washers and hardware
- Original Equipment Manufacturer(OEM) Part
The Liftmaster Gear Kit 41a2817 is compatible with Chamberlain Liftmaster Sears Craftsman units manufactured 1984-current. The manufacture date can be found on the motor head. Important note: use entire tube of lubrication during the installation of the gears or the drive gear will shred quickly, possibly within a couple of days.
| Parts and instructions work well | 2010-05-23 | 4 / 5 |
|
The parts arrived on time and were as ordered.
All the parts I needed were included and some parts were not necessary to fix my opener. My opener is more than 15 years old. The instructions did not match the configuration of my unit, but the concepts were the same and I was able to accommodate the differences once I understood the general procedure, the order of events and the components of the mechanism. It took about three hours to do the complete job, including small adjustments to the door open and door close stops and getting the correct tension on the chain. I completed the repair three weeks ago and have cycled the door at least 20 times, including the five test cycles. Everything works fine. |
| easy fix but be careful | 2010-05-18 | 4 / 5 |
|
If you are mechanically inclined, this kit offers an easy way to extend the life of your garage door opener. Just be careful because door openers can cause serious injuries. Do it right the first time, because the second time it will be much harder if you are missing a finger.
These parts, along with the instructions, provide an easy fix for what is arguably a defect in this popular door opener. It's obvious that the cheap plastic gear is the weak link in the machine. As I suspected, I only needed the main gear, but for a few dollars more, I ordered this kit in case I needed something else. Now I've got extra parts that I dont need (yet), but I would definitely do it the same way again.
I was able to skip most of the instruction steps (because I only needed to change the main gear) so it took me less than 30 minutes. If you need to change the worm gear, it will take much longer. |
| Garage Fix | 2010-04-07 | 4 / 5 |
|
| Very happy to know there are products out there to find in to fix simply things like a garage door opener, Thank You. |
| As advertised | 2010-03-25 | 5 / 5 |
|
| It's great to be able to find such replacement parts without having to deal with Sears. They don't back their products and look for any way possible to avoid doing so. Even if a potential safety issue has been documented many times they refuse to accept responsibility. It takes actual personal injury or death before they "might". |
|
| The parts fit fine, the opener is a pain to take apart and the pins on the main drive shaft were a real PIA to get out. The pin got destroyed while I was removing it but a new one was included in the kit. The kit also included other parts that are not used. |
)
